Total Laboratory Services Ltd - ERWEKA UK

The new patented steam cleaning method from Gloss Technologies that is build inside the DVC-24 allows quick and easy dissolution tester vessel cleaning. Since the vessels can remain inside the dissolution testers, risks of accidents such as glass breakage or contamination due to spilling are completely avoided. With a short start-up time of less than seven minutes and vessel cleaning within 20 seconds, the DVC-24 greatly speeds up the remachining process of dissolution testers. Thanks to its light-weight and mobile design, the DVC-24 can be used in every laboratory and with all dissolution testers, regardless of the equipment manufacturer.<br/><br/>To guarantee reliable cleaning results, it is possible to qualify the cleaning method, complete with reference tablets and qualification documents.

Dissolution Vessel Cleaning - DVC-24

The 3D Mixer is a powerful mixer for mixing of different materials, such as powders and fluids. The mixer rotates after the principal of an oloid (by Paul Schatz).

3D Mixer Attachment - ERWEKA AR 403

The suppository moulding unit SG 4/W is intended for the production of moulded suppositories, lipsticks and similar moulded products. The mixing vessel (5 litre volume, working capacity max. 65%) is located in a warm oil bath fitted with a thermostatically controlled heater adjustable between 20°C and 100°C.

Suppository Moulder Attachment - ERWEKA AR 403

The conical mill CM is a product infeed system for application in developments in the pharmaceutical and food industries, which comminute powdery and free flowing products by a sieve with fixed maximum sizes of impurity-free granule (adjustable 0.3 – 3.0 mm; perforated round holes, grater holes or square holes).

Conical Mill  Attachment - ERWEKA AR 403 

Coating pans are used for coating tablets. The universal gear is required to attach the coating pan to the motor drive.This allows adjusting the angle of the pan and getting an optimum result from the coating process.

Coating Pan Attachment - ERWEKA AR 403

The cube mixer uses a tumbling motion to produce a homogenous blend within a short time. The mixing action is assisted by three stainless steel rods strategically positioned within the cube. The cube mixer is attached to the drive unit via the ERWEKA Universal Gear UG, which permits operation at various angles for optimum efficiency. The cube mixer is available in several version of acrylic glass or stainless steel.

Total Laboratory Services Ltd - ERWEKA UK

Home

Videos

Playlists

About

Keep up to date with all your favourite videos and channels.

Get personalised notifications on new releases and channel content by subscribing to the LabTube eNewsletter.