HTA srl

HT1500U is an HTA autosampler able to fully automate the sample loading into the Ion Chromatograph for the anions and cations analysis.

HT1500U perfectly fits the most of the ICs available on the market  and allows a seamless integration with the most of the Data Systems.

HT1500U has been engineered to offer the best balance between quality and affordability to perfectly fit the requirements of standard IC applications.

HT1500U supports stainless steel as well as polymeric needles to deal with metal sensitive applications.

HT1500U holds multiple racks - each of them removable- to allow continuous sample feeding and more convenient operations. The on-board solvent reservoir allows for the needle and the whole flowpath to be cleaned before processing the next sample. 

HT1500U supports open as well as sealed tubes.

HT1500U: Autosampler for  Ion Chromatography

HT1500U can be used in a number of flow-through-cell (also known as flow-through cuvette or quartz cell) applications such as: UV-VIS, NIR, colorimeters and many more. HT1500U is the best choice for anyone who is looking for immediate automation, potentially avoiding the need to source an expensive sipper.
Beside the undoubted productivity boost, HT1500U will increase analysis robustness and will significatively reduce carry-over: you can indeed programme as many washing cycles as you need for this purpose; sample replicas and calibration curve could be conveniently run whenever needed with no fuss. Moreover, in case you have a precious sample to analyse, you should not worry anymore about product handling (with the relative risk of sample spill or waste): HT1500U could automatically bring back the sample inside its vessel after the analysis instead of displacing it to the waste tank.

HT1500U can be deployed in any environment, lab or production, and operated by anyone with no or minimal training. Just load the samples on the autosampler carousel and press the start button: the autosampler and the spectrophotometer or colorimeter will take care of your analysis for you.

HT1500: Autosampler for Flow-Through cell applications (UV-VIS, NIR spectrophotometer and colorimeter)

HT4000A sample prep workstation can automate chemical and biological reaction, through the handling of derivatization operations followed by the incubation in a temperature controlled reaction cell. Final reaction product can be directly injected into HPLC for on-line analysis.

HT4000A - chemical/biological reaction automation before HPLC injection

HT4000A is HTA sample preparation workstation that allows automation of sample
preparation procedures by taking care of a large number of operations such as liquid handling, purification or filtration, tracking and further sample processing such as vortex, automatic uncap/ recap, and weigh. 

This video focus on automatic uncap/recap function of HT4000A.

Automatic uncap/recap is particularly useful when samples or solvents are volatile. In such cases septum piercing is not recommended because a sample loss can occur, especially if samples remain long time in the workstation; therefore it is more advisable to uncap the sample vessels, perform liquid handling tasks, and then immediately recap.

In this video we show:
•	Sample vial displacement
•	Screw  cap decapping
•	Screw  cap recapping


AUTOMATED UNCAP/RECAP FOR SAMPLE VIALS

HT4000A allows automation of sample preparation procedures in order to increase lab productivity, improve repeatability and traceability, lower operator’s health and safety risks and reduce crosslab CV by increasing method robustness.

HT4000A takes care of a large number of operations such as liquid handling (aspiration, dispensation, mixing, dilution, derivatisation, sample reformatting), filtration or purification (by syringe filter, MEPS, Whatman® Mini-UniPrep® syringeless vials, LLE), vessel handling (weighing, capping/uncapping, vortex), identification (BCR, RFID), sample conditioning (cooling, heating), and automated injection for HPLC, IC and some spectroscopy applications.

HT4000A is designed as a tailor-made solution. The modular design allows easy configuration and affordable costs. The liquid handling module is included in each configuration, while all other modules are included, according to your requirements. You get your HT4000A instrument tailored and designed to fit your lab workflow. Furthermore, by adding or removing modules, you are quickly able to deploy an additional or different sample prep procedure.



HT4000A features the widest support of sample vessels. The most common sample vessels are supported: vials (2/4/6/10/20/40ml), test tubes, tube blocks, plates, Vacutainers and several more. More than one type of vessel can be handled at the same time in order to support sample reformatting steps that are often required by sample preparation procedures.

HT4000A is handled by HTAPREP. HTAPREP – lab automation software – offers powerful method development by a simple drag & drop approach and smart sample processing: complex routine and experiments can be defined in a few easy steps. 

HTA offers Free Automation Project. An automation consultant will configure  HT4000A according to the sampleprep method required by customer. 

HT4000A: Sample Prep Workstation

Compatible with any HPLC system, HT1500L has been engineered to offer the best balance of quality and affordability to perfectly fit the requirements of standard HPLC applications. Easy-To-Operate A simple, easy-to-use keypad allows to start the analysis by just loading your samples and pushing the START button. All the samples in the racks will be automatically processed: you can experience a seamless integration with your Chromatography Data System. Cunning sample carousel HT1500L holds multiple racks – each of them removable – to allow continuous sample feeding and more convenient operations. The on-board solvent reservoir allows the needle and the whole flowpath cleaning before processing the next sample. Competitive price HT1500L provides excellent analytical performance, 45 sample capacity and incomparable reliability and robustness, while all the non-essential features have been removed to keep the price low and make the investment more viable. No Compromise on Quality HT1500L has a strong commitment to quality that focuses on providing a real unattended experience. The materials have been pick up to provide longevity, the up-to-date technologies offer reliability while the design attests our care in details.

HTA srl

Home

Videos

Playlists

About

Keep up to date with all your favourite videos and channels.

Get personalised notifications on new releases and channel content by subscribing to the LabTube eNewsletter.