Kinesis

OmniSep™ packed columns are a cost-effective solution to the time-consuming, manual labour step of packing delicate, low-pressure liquid chromatography (LPLC) media in reusable glass columns. OmniSep™ adheres to rigorous standards for consistency and quality to ensure efficiency and repeatability in the laboratory.

Range of Applications

OmniSep™ columns are available with ten types of cross-linked agarose- and dextran-based media that are commonly used for preparative chromatography applications:

    IEX: OmniSep™ Dash A-Q, A-SP, A-DEAE and A-CM
    HIC: OmniSep™ Dash A-Phenyl, A-Octyl and A-Butyl
    SEC: OmniSep™ Dash A
    Desalting: OmniSep™ A-Ni (affinity) and OmniSep™ D (SEC) are desalting columns available in disposable 5mL and 1mL polypropylene packages.

OmniSep™ packed columns and Omnifit® precision chromatography columns are offered by Diba and distributed globally by Kinesis. Diba are specialists in fluid handling, with facilities in the US, the UK and Asia. Diba is a Halma company.

Choose your local Kinesis office at www.kinesis-group.com to order online or find out more.

Introducing OmniSep™ Packed Columns by Omnifit™ Labware

Follow this video for Omnifit Gripper and P-Type Omnilok Fitting assembly instructions. Step 1. Slice the tubing on a bias cut with a long point. Step 2. Insert Tubing into the Ferrule as shown. Step 3. Using pliers or similar tool, pull the tubing through the ferrule. The longer you have made the slice in the tubing, the easier this step will be. Take care to ensure the sealing face of the ferrule is not damaged by fingernails or the tool. Step 4. Rotate the Ferrule around the tubing to seat it properly. Step 5. Carefully cut the excess tubing perfectly flush with the ferrule sealing face. Do not cut into or nick the ferrule while cutting. Ensure the cut is perfectly straight across the tube. Carefully inspect each assembly. A microscope is useful to check the quality of the cut tubing at the sealing face.

Assembling Omnifit Gripper and P-Type Omnilok Fittings

Our video shows the installation of a KX VaporSafe Closed System HPLC Waste Container on a Waters Alliance 2695 with 2996 PDA. 
Several safety problems are solved including possible leaks and VOC outgassing. 
This video is intended as an instructional guide to aid the installer.

To find out more about KX Vaporsafe please visit your local website below:

www.kinesis.co.uk | www.kinesis-usa.com | www.kinesis-australia.com.au | www.abimed.de

KX Vaporsafe - Solvent safety and waste containment solutions from Kinesis

These instructions can be applied for the following column types:

• Benchmark™
• Hit™
• SolventPlus™

Please read the instructions as they are shipped with your column parts.

Do not use the end-nut to force the plunger (end-piece) into the column tube. Although robust, the glass threads need to be treated with great care.

To find out more please visit your local website below:

www.kinesis.co.uk | www.kinesis-usa.com | www.kinesis-australia.com.au | www.abimed.de


Kinesis

Home

Videos

Playlists

About

Keep up to date with all your favourite videos and channels.

Get personalised notifications on new releases and channel content by subscribing to the LabTube eNewsletter.